Select Your Vehicle

EBC Front Brake Kit



Loading image, please wait.

Please wait
$279.99
Login to add to wishlist



Features:
Angled slots on rotor surfaces allow superior expulsion of heat, water, brake dust, and friction gases
Round indents in the rotors surface further increase cooling without the risk of cracking that drill-through holes pose
Black GEOMET and NITROTHERM™ anti corrosive finish
Brake rotors are unidirectional to the left and right side of your vehicle to maximize effectiveness
3GD vented centers feature a wider aperture for air to pass between both rotor sides for superior cooling
EBC recommends a 500 mile break in period with lighter braking application
6-month/3,000 mile manufacturer warranty against premature rotor wear under normal driving conditions
Designed to provide an optimum combination of street and racetrack performance
Unique composition allows high braking friction when brakes are cold
Features a cold friction rating of 0.5
Backing plate and side edges of brake pad are yellow powder coated for resistance to corrosion
Pad surfaces have chamfered edges to reduce contact against rotor lip that forms over time and causes squealing
Center gap allows for proper heat expansion of brake pads
Built in noise-reducing shims
Provides equivalent performance to GG-rated brake pads
Patented Brake-In™ red pad surface coating provides better grip during the first 100 miles after new pads are installed
Patented Brake-In™ red pad surface coating scours off any existing glaze or heat spots from brake rotor surface for more even surface mating
6 month/10,000 mile manufacturer warranty against premature pad wear under normal driving conditions
Benefits:
Dimpled holes and Slots reduce stopping distances in wet weather
Slots help to increase pad bite and improve air circulation
Dimples are resistant to cracking compared to drilled holes
Dimples reduce the stress on the pads and improve heat dissipation
Dimpled holes and Slots create an escape route for debris, dust, gases, and water
Slots clean and de-glaze pad surface for optimum pad coefficient of friction
EBC pioneered brake rotors with dimple-drilled round indents decades ago to provide a solution to cracking problems that sometimes plague perforated rotors operating under high stress and heat conditions. What makes the 3GD Series Dimpled and Slotted Sport Rotors superior is the presence of both these dimpled indents and straight vent slots. Combined, they provide the superior expulsion of heat, water, brake dust, and friction gas that is needed to keep rotors cool and functional during street performance driving in any weather. Additionally, 3GD rotors feature a wider vented aperture for air to pass between both rotor sides, so metal expands evenly during use and the chance of warpage is minimized. 3GD rotors are designed for use with EBC Greenstuff 4x4 brake pads, Greenstuff 2000 compact car pads, Yellowstuff heavy duty 4x4 brake pads, and Yellowstuff / Redstuff pads created for shorter high performance street or track runs and drifting. 3GD brake rotors are anodized to prevent corrosion, and rotors should be fully ready for use after the first 500 miles of moderate brake application.
EBC Yellowstuff 4000 "R" Series Full Race Brake Pads deliver fade-free performance on the racetrack, effective grip during street racing and drifting, and comfortable, easy-to-use operation under normal driving conditions. From the Swedish Camaro Cup to Mazda MX5 Miata competitions to SCCA challenges, Yellowstuff Racing Series pads are favored by drivers across a wide range of racing cup events that require the use of stock OEM brake caliper systems. Why? The more exotic aramid fiber construction of Yellowstuff pads is known for its ability to maintain easy controllability and high grip levels at any temperature while also resisting heat buildup and brake fade under severe conditions. EBC conceived the Yellowstuff 4000 line for lighter Japanese vehicles as well as heavier, high-horsepower sedans typically found travelling German autobahns at triple-digit velocities.
If you’re installing Yellowstuff 4000 "R" Series Full Race Brake Pads with new brake rotors, you’ll find down the road when the time comes to replace the pads again, rotors will still be usable enough to last through another set of brake pads. And if you are installing EBC pads without replacing rotors, pre-chamfered pad edges will mate perfectly against the grooves and lips that normally form on the rotor surfaces, so the meat of the pad makes contact against the rotor center where it counts. These pads also feature a red top layer coating designed to scour glaze and hot spots off worn brake rotors during the break-in process. As it does that, the coating also serves to provide a higher level of grip to counteract low friction levels that exist before bedding is complete. Built-in shims ensure any high-frequency vibration is absorbed rather than transferred as squealing noise, even under the most extreme weather conditions. EBC backs their replacement brake pads with a 6-month or 10,000 mile warranty against premature wear under normal driving conditions.
S5KF1583

Product Added: July 24, 2015
Part Number: dfdd00630
Automotive Racing Products website COBB Tuning website Crane Cams website DiabloSport website Eagle Speciality Products website Fidanza website
Innovate Motorsports website Kinetic Motorsport website Mopar website Tork Motorsports website Turbosmart website Wiseco website